Yamaha WC42260 - Manual (Page 171)

Comp Library
171
DM2000 Version 2—Owner’s Manual
Comp Library
Comp settings can be stored in the Comp library, which contains 36 preset memories and
92 user memories. Preset memories are read-only. User memories enable you to store cus-
tom settings. See page 137 for information on the Comps.
1 Use the DYNAMICS [DISPLAY] button to select the Comp Library page.
2 Use the LAYER buttons to select Layers, and the [SEL] buttons to select chan-
nels.
When storing, the Comp settings of the currently selected channel, indicated in the
upper-right corner, are stored to the selected memory. When recalling, the Comp settings
in the selected memory are applied to the currently selected channel.
CURRENT TYPE: This indicates the current Comp type of the currently selected channel.
CURRENT CURVE: This is the Comp curve of the currently selected channel.
GR meters: These meters indicate the amount of gain reduction being applied by the
Comp, and the levels of the currently selected channel and its adjacent channel. If Pair mode
for the currently selected channel is set to Vertical, the level of its counterpart on the adja-
cent Layer is displayed.
TYPE/CURVE: The type (Compressor, Expander, Compander Hard, Compander Soft)
and curve of the currently selected memory is displayed to the right of the memory list.
For details on the Store, Recall, Title Edit, and Clear functions, see “General Library Oper-
ation” on page 165.