ZyXEL Communications 2864 - Manual (Page 83)

7–5
Sync Clock Internal
Line Type Dial-up
AT&V4
Profile 3 Settings.............
B0 E1 L4 M1 N5 Q0 V1 X5
&B1 &C1 &D0 &G0 &H0 &J0 &K0 &L2 &M3 &N0 &P0 &R0
&S0 &X0 &Y1
*B0 *C0 *D0 *E0 *F0 *G0 *I0 *L0 *M0 *P9 *Q2 *S0
s000=000 s001=000 s002=043 s003=013 s004=010
s005=008 s006=003 s007=060 s008=002 s009=006
s010=007 s011=070 s012=000 s013=000 s014=200
s015=130 s016=000 s017=018 s018=000 s019=000
s020=001 s021=018 s022=000 s023=105 s024=138
s025=000 s026=000 s027=128 s028=068 s029=000
s030=000 s031=017 s032=019 s033=255 s034=030
s035=032 s036=000 s037=000 s038=000 s039=032
s040=000 s041=000 s042=000 s043=008 s044=000
s045=100 s046=028 s047=064 s048=000 s049=006
s050=000 s051=000 s052=000 s053=000 s054=000
s055=000 s056=000 s057=000 s058=000 s059=000
s060=000 s061=000 s062=000 s063=000 s064=000
…
s115=000 s116=000 s117=000 s118=000 s119=000
s120=000 s121=000 s122=000 s123=000 s124=000
s125=000 s126=000 s127=000
OK
Profile 3 is set for the needs of a synchronous 4-wire leased-line operation. For mod-
els without 4-wire leased line, the default setting for this profile is the same as for
profile 0 since they don't have a 4-wire mode.
Link Option MULTI-AUTO
Data Format SYNC
DTR Ignored
RTS CTS Tracks RTS
DCD Tracks Carrier
DSR Always On
Quality Action Adaptive rate
Sync Clock Internal
Line Type 4W Leased Line
Auto Handshake Originate