ZyXEL Communications 2864 - Manual (Page 82)

7–4
Error Control V.42bis + MNP5
Flow Control CTS / RTS
Quality Action Adaptive Rate
Line Type 2W Leased Line
Terminal Keyboard Aborting Disabled
Auto Handshake Originate
AT&V3
Profile 2 Settings.............
B0 E1 L4 M1 N5 Q0 V1 X5
&B1 &C1 &D2 &G0 &H0 &J0 &K0 &L0 &M3 &N0 &P0 &R0
&S1 &X0 &Y1
*B0 *C0 *D0 *E0 *F0 *G0 *I0 *L0 *M0 *P9 *Q2 *S0
s000=000 s001=000 s002=043 s003=013 s004=010
s005=008 s006=003 s007=060 s008=002 s009=006
s010=007 s011=070 s012=000 s013=000 s014=192
s015=130 s016=000 s017=018 s018=000 s019=000
s020=001 s021=154 s022=000 s023=105 s024=138
s025=000 s026=000 s027=128 s028=068 s029=000
s030=000 s031=017 s032=019 s033=255 s034=030
s035=032 s036=000 s037=000 s038=000 s039=032
s040=000 s041=000 s042=000 s043=008 s044=000
s045=100 s046=028 s047=064 s048=000 s049=006
s050=000 s051=000 s052=000 s053=000 s054=000
s055=000 s056=000 s057=000 s058=000 s059=000
s060=000 s061=000 s062=000 s063=000 s064=000
…
s115=000 s116=000 s117=000 s118=000 s119=000
s120=000 s121=000 s122=000 s123=000 s124=000
s125=000 s126=000 s127=000
OK
Profile 2 is set for the needs of a synchronous dial-up line operation. For the internal
card or parallel port model, the default setting for this profile is the same as for
profile 0 since there is no synchronous mode.
Link Option MULTI-AUTO
Data Format SYNC
DTR 108.2, Data Terminal Ready
RTS CTS Tracks RTS
DCD Tracks Carrier
DSR CCITT (ITU-T)
Quality Action Adaptive Rate