ZyXEL Communications 2864 - Manual (Page 117)

9–7
&K0 No error control.
&K1 MNP4 (includes MNP3).
&K2 MNP4 + MNP5. (See also S38b5 , S41b0 )
&K3 V.42 + MNP4.
+ &K4 V.42 + V.42bis, compatible with &K2 . (Default) (See also S38b5 )
+ &L0 Normal 2-wire dial-up line. (Default)
&L1 2-wire leased line.
&L2 4-wire leased line.
+ &M0 Asynchronous mode, buffered data. (Default)
&M1 Asynchronous command, synchronous data.
&M2 Direct asynchronous mode, no buffering.
&M3 Synchronous mode.
+ &N0 Multi-Auto; auto-negotiates the highest possible link rate (V.34
28800-2400, ZyX19200, ZyX16800, V.32bis 14400/12000/7200,
V.32 9600T/9600/7200/4800, V.22bis 2400/1200, V.22 1200, Bell
212A 1200, V.17 FAX 14400/12000/9600/7200, V.29 FAX 9600/
7200, V.27ter FAX 4800/2400, and cellular modes 14400 - 4800).
(Default)
&N1 V.33 14400/12000 (models with 4-wire leased line only)
&N2 V.33 12000 (models with 4-wire leased line only)
&N3 V.32 9600T/9600/7200/4800
&N4 V.32 9600/7200/4800
&N5 V.32 4800
&N6 V.29 9600 (models with 4-wire leased line only)
&N7 V.29 7200 (models with 4-wire leased line only)
&N8 V.29 4800 (models with 4-wire leased line only)
&N9 V.27bis 4800 (models with 4-wire leased line only)
&N10 V.27bis 2400 (models with 4-wire leased line only)
&N11 V.26bis 2400 (4-wire leased line or 2-wire half-duplex)
&N12 V.23 1200/75 (see also S48b3 , S52b7 )
&N13 V.23 600/75 (see also S52b7 )
&N14 V.22bis 2400/1200
&N15 V.22 1200