ZyXEL Communications 2864 - Manual (Page 75)

6–9
RDL REQUEST
LLINE TX POWER (Leased LINE)
PHONE JACK
MAKE/BREAK RATIO
SECONDARY CHANNEL (Optional feature)
GRANT AT&T4 Accepts remote digital loopback test request
from remote modem. Must be set when remote
configuration is needed.
+ DENY AT&T5 Ignores remote digital loopback test request
from remote modem. (Default)
0 to -15 dBm AT*P0
...
AT*P15
Selects transmission power from 0 dBm to -15
dBm. Default is -9 dBm. Effective in leased-line
operation only. Select in the range of -12 to -27
dBm when
S35b3 is set. The Omni 288P and
288S have a maximum TX power of -9dBm
and -3dBm, respectively.
+ SINGLE RJ11 AT&J0 RJ11 permissive telephone jack for dial-up line.
(Default)
MULTIPLE
RJ12/13 AT&J1 The modem supports A/A1 multi-extension tele-
phone.
+ 39% / 61% AT&P0 For use in the USA/Canada and some other
countries. (Default)
33% / 67% AT&P1 For use in the UK and some other countries.
Note: Controls the ratio of Make (Off-hook) and Break (On-hook) interval
for pulse dialing. Some countries have
AT&P1 as default.
+ DISABLED AT*S0 Secondary channel is disabled. (Default)
ENABLED AT*S1 Secondary channel is enabled.
Note: This option is available for models with the N suffix (networking).