ZyXEL Communications 2864 User Manual
Page 182
16–6
1 (0x31)
DTMF 1
2 (0x32)
DTMF 2
3 (0x33)
DTMF 3
4 (0x34)
DTMF 4
5 (0x35)
DTMF 5
6 (0x36)
DTMF 6
7 (0x37)
DTMF 7
8 (0x38)
DTMF 8
9 (0x39)
DTMF 9
0 (0x30)
DTMF 0
A (0x41)
Extended Keypad DTMF A
B (0x42)
Extended Keypad DTMF B
C (0x43)
Extended Keypad DTMF C
D (0x44)
Extended Keypad DTMF D
* (0x2A)
Extended Keypad DTMF *
# (0x23)
Extended Keypad DTMF #
o (0x6F)
Receival Buffer Overrun.
c (0x63)
T.30 fax calling tone (1100Hz). The time interval between re-
ports is 4.0 seconds.
e (0x65)
Data modem calling tone (1300Hz). The time interval be-
tween report is 4.0 seconds.
h (0x68)
Line current breaks (local phone goes on-hook).
H (0x48)
Line current is detected (local phone goes off-hook).
s (0x73)
Silence is detected. The DCE has determined that there was no
voice energy present at the beginning of the voice receiving
session followed by a period of silence greater than the
amount of time selected by the +VSD command.
q (0x71)
Quiet is detected. The DCE has determined that there was
voice energy present at the beginning of the voice receiving
session followed by a period of silence greater than the
amount of time selected by the +VSD command.
$ (0x24)
Bong Tone (300Hz for 1 second).
l (0x6C)
Loop current interruption. This may indicate a remote hang-up.
Event Report Description