Filtering, 1 overview, 2 configure a filtering rule – ZyXEL Communications ES-2108 User Manual
Page 85: Chapter 10 filtering, 1 overview 10.2 configure a filtering rule, Figure 40 filtering, Table 19 filtering
ES-2108 Series User’s Guide
Chapter 10 Filtering
85
C
H A P T E R
10
Filtering
This chapter discusses static IP and MAC address port filtering.
10.1 Overview
Port filtering means discarding (or dropping) packets based on the MAC addresses and VLAN
group.
10.2 Configure a Filtering Rule
Click Advanced Application and Filtering in the navigation panel to display the screen as
shown next.
Figure 40 Filtering
The following table describes the related labels in this screen.
Table 19 FIltering
LABEL
DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
MAC
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
VID
Type the VLAN group identification number.