ZyXEL Communications ES-2108 - Manual (Page 163)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 163
https Disables secure web browser
access to the switch.
icmp Disables ICMP access to the
switch such as pinging and
tracerouting.
snmp Disables SNMP management.
ssh Disables SSH (Secure Shell)
server access to the switch.
telnet Disables telnet access to the
switch.
snmp-server trap-destination Disables sending of SNMP
traps to a station.
spanning-tree Disables STP.
Disables STP on listed ports.
ssh key Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
known-hosts Removes all remote hosts.
known-hosts
ip>
Removes the specified remote
hosts from the list of all known
hosts.
known-hosts
ip> [1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
storm-control Disables broadcast storm
control.
timesync Disables timeserver settings.
trunk Disables the specified trunk
group.
interface Removes ports from the
specified trunk group.
lacp Disables LACP in the specified
trunk group.
vlan Deletes the static VLAN entry.
vlan1q gvrp Disables GVRP on the switch.
ingress-check Disables VLAN tag checking on
incoming traffic.
port-isolation Disables port isolation.
password Change the password for
Enable mode.
port-access-
authenticator
Enables 802.1x authentication
on the switch.
Table 58 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION