Initial setup example, 1 overview, 1 creating a vlan – ZyXEL Communications ES-2108 User Manual

Page 51: Chapter 5 initial setup example, Figure 22 initial setup network example: vlan

Text mode
Original mode

ES-2108 Series User’s Guide

Chapter 5 Initial Setup Example

H A P T E R

Initial Setup Example

This chapter shows how to set up the switch for an example network.

5.1 Overview

The following lists the configuration steps for the initial setup:

• Create a VLAN
• Set port VLAN ID
• Configure the switch IP management address

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members.

In this example, you want to configure port 5 as a member of VLAN 2.

Figure 22 Initial Setup Network Example: VLAN