ZyXEL Communications ES-2108 - Manual (Page 186)

ES-2108 Series User’s Guide
186 Chapter 28 Command Examples
Figure 127 name Command Example
28.10.10 speed-duplex
Syntax:
speed-duplex
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the speed to 10 Mbps in half duplex mode.
Figure 128 speed-duplex Command Example
ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test
full|100-half|100-
full|1000-full> Sets the duplex mode (half or full) and speed (10, 100 or 1000 Mbps)
of the connection on the port. Selecting auto (auto-negotiation)
makes one port able to negotiate with a peer automatically to obtain
the connection speed and duplex mode that both ends support.
ras(config)# interface port-channel 1,3-5
ras(config-interface)# speed-duplex 10-half