ZyXEL Communications ES-2108 - Manual (Page 169)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 169
default-gateway Sets a default gateway IP address for
this VLAN.
default-
management dhcp-
bootp
Sets the dynamic in-band IP address
default-
management
address>
Sets a static in-band IP address and
subnet mask.
default-
management dhcp-
bootp release
Releases the dynamic in-band IP
address.
default-
management dhcp-
bootp renew
Updates the dynamic in-band IP
address.
name Specifies a name for identification
purposes.
no fixed Sets fixed port(s) to normal port(s).
forbidden
list>
Sets forbidden port(s) to normal
port(s).
inactive Enables the specified VLAN.
ip address
address>
Deletes the IP address and subnet
mask from this VLAN.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
ip address
default-
management dhcp-
bootp
Sets the default in-band interface to
use a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
untagged
list>
Enables VLAN tagging for outgoing
traffic on the specified port(s).
normal
list>
Specifies the port(s) to dynamically
join this VLAN group using GVRP
untagged
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted
with this VLAN Group ID.
Table 60 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION