ZyXEL Communications ES-2108 - Manual (Page 164)

ES-2108 Series User’s Guide
164 Chapter 27 Introducing the Commands
Enables 802.1x authentication
on the specified port(s).
reauthenticate Sets a subscriber to periodically
re-enter his or her username
and password to stay
connected to a specified port.
reauth-period Specifies how often a client has
to re-enter the username and
password to stay connected to
the specified port(s).
port-security Enables port security on the
switch.
Enables the port security
feature on the specified port(s).
learn inactive Disables MAC address learning
on the specified port(s).
address-limit Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
queue level <0-7>
priority <0-3>
Sets the priority level-to-
physical queue mapping.
radius-server host [acct-
port
number>] [key
string>]
Sets the IP address and/or the
port number and key of the
external RADIUS server.
remote-
management
start-addr
end-addr
service
[telnet][ftp][http
][icmp][snmp][ssh]
[https]
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
service-control ftp Allows FTP access on the
specified service port.
http
number>
Allows HTTP access on the
specified service port and
defines the timeout period.
https
number>
Allows HTTPS access on the
specified service port.
icmp Allows ICMP access for
services such as Ping.
snmp Allows SNMP management.
ssh Allows SSH access on the
specified service port.
telnet
number>
Allows Telnet access on the
specified service port.
snmp-server [contact
contact>] [location
]
Sets the geographic location
and the name of the person in
charge of this switch.
Table 58 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION