ZyXEL Communications ES-2108 - Manual (Page 165)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 165
get-community Sets the get community.
set-community Sets the set community.
trap-community Sets the trap community.
trap-destination Sets the IP addresses of up to
four stations to send your
SNMP traps to.
spanning-tree Enables STP on the switch.
Enables STP on a specified
port.
path-
cost <1-65535>
Sets the STP path cost for a
specified port.
priority <0-255>
Sets the priority for a specified
port.
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30>
Sets Hello Time, Maximum Age
and Forward Delay.
help Displays help information.
priority <0-61440> Sets the bridge priority of the
switch.
spq Sets the switch to use Strictly
Priority Queuing (SPQ).
ssh known-hosts
ip> <1024|ssh-
rsa|ssh-dsa>
Adds a remote host to which the
switch can access using SSH
service.
storm-control Enables broadcast storm
control on the switch.
time Sets the time in hour, minute
and second format.
date
year>
Sets the date in year, month
and day format.
help Displays help information.
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
timesync Sets the time server protocol.
server Sets the IP address of your time
server.
trunk Activates a trunk group.
interface Adds a port(s) to the specified
trunk group.
Table 58 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION