ZyXEL Communications ES-2108 - Manual (Page 159)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 159
27.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
session Displays current SSH session(s).
system-information Displays general system information.
time Displays current system time and date.
timesync Displays time server information.
trunk Displays link aggregation information.
vlan Displays the status of all VLANs.
Displays the status of the specified VLAN.
vlan-stacking Displays VLAN stacking settings.
vlan1q gvrp Displays GVRP settings.
port-isolation Displays port isolation settings.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command ] Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute [in-
band|out-of-
band|vlan
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help Displays command help information.
write memory Saves current configuration to the
configuration file the switch is currently
using.
Saves current configuration to the
specified configuration file on the switch.
Table 57 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 58 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password Changes the administrator
password.
bandwidth-
control
Enables bandwidth control.
diffserv Enables DiffServ.
dscp <0-63>
priority <0-7>
Sets the DSCP-to-IEEE 802.1q
mappings.