ZyXEL Communications ES-2108 - Manual (Page 167)

ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 167
exit Exits from the interface port-
channel command mode.
flow-control Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
frame-type Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
gvrp Enables this function to permit
VLAN groups beyond the local
switch.
help Displays a description of the
interface port-channel
commands.
inactive Disables the specified port(s) on
the switch.
mirror Enables port mirroring in the
interface.
dir
th>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
name
string>
Sets a name for the port(s).
Enter a descriptive name (up to
nine printable ASCII
characters).
no bandwidth-limit Disables bandwidth limit on the
port(s).
bmstorm-limit Disables broadcast storm
control limit on the port(s).
diffserv Disables DiffServ on the
port(s).
egress set Disables outgoing traffic on the
port for port-based VLAN.
flow-control Disables flow control on the
port(s).
gvrp Disables GVRP on the port(s).
inactive Enables the port(s) on the
switch.
mirror Disables port mirroring on the
port(s).
vlan-trunking Disables VLAN trunking on the
port(s).
Table 59 interface port-channel Commands (continued)
COMMAND DESCRIPTION