ZyXEL Communications ES-2108 - Manual (Page 180)

ES-2108 Series User’s Guide
180 Chapter 28 Command Examples
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
• Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption
key from the list of known hosts.
Figure 116 no ssh Command Example
28.8 spq
Syntax:
spq
Activates Strict Priority Queuing (SPQ). An example is shown next.
Figure 117 spq Command Example
28.9 wrr
Syntax:
wrr
where
The following example sets the switch to use WRR queuing and sets the queue weights for Q0
to Q3.
known-hosts Remove specific remote hosts from the list of all known hosts.
known-hosts
[1024|ssh-rsa|ssh-dsa] Remove remote known hosts with a specified public key (1024-
bit RSA1, RSA or DSA).
ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa
ras(config)# spq
Enables WRR (Weighted Round Robin) queuing method on the switch.
.. Sets the interface to use WRR queuing. A weight value of one to eight is
given to each variable from
wt1 to wt4 .