ZyXEL Communications ES-2108 - Manual (Page 156)

ES-2108 Series User’s Guide
156 Chapter 27 Introducing the Commands
27.9.1 User Mode
The following table describes the commands available for User mode.
27.9.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 56 Command Summary: User Mode
COMMAND DESCRIPTION
enable Accesses Enable (or privileged) mode. See Section 27.9.2
on page 156 .
exit Logs out from the CLI.
help Displays help information.
history Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout Exits from the CLI.
ping Sends Ping request to an Ethernet device.
[vlan
]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the specified
VLAN(s) with the specified parameters.
help Displays command help information.
show ip Displays IP related information.
system-information Displays general system information.
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the specified SSH version.
traceroute Determines the path a packet takes to a device.
[vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a VLAN.
help Displays command help information.
Table 57 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5> Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
boot config Restarts the system.
configure Accesses Configuration mode. See
Section 27.9.3 on page 159 .
disable Exits Enable (or privileged) mode.