ZyXEL Communications ES-2108 - Manual (Page 171)

ES-2108 Series User’s Guide
Chapter 28 Command Examples 171
C
H A P T E R
28
Command Examples
This chapter describes some commands in more detail.
28.1 Overview
These are commands that you may use frequently in maintaining your switch.
28.2 show Commands
These are the commonly used show commands.
28.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Figure 101 show system-information Command Example
ras> show system-information
System Name : ES-2108
System Contact :
System Location :
Ethernet Address : 00:13:49:1a:d4:fa
ZyNOS F/W Version : V3.60(TX.0)| 04/22/2005
RomRasSize : 1816320
System up Time : 0:59:37 (5757d ticks)
Bootbase Version : V1.07 | 04/20/2005
ras>