ZyXEL Communications ES-2108 - Manual (Page 179)

ES-2108 Series User’s Guide
Chapter 28 Command Examples 179
Figure 114 no trunk Command Example
28.7.4 no port-access-authenticator
Syntax:
no port-access-authenticator
no port-access-authenticator reauthenticate
no port-access-authenticator
where
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.
Figure 115 no port-access-authenticator Command Example
28.7.5 no ssh
Syntax:
no ssh key
no ssh known-hosts
no ssh known-hosts [1024|ssh-rsa|ssh-dsa]
where
ras(config)# no trunk T1
ras(config)# no trunk T2 interface 1,3-5
= Disables port authentication on the switch.
reauthenticate = Disables the re-authentication mechanism on the listed port(s).
= Disables authentication on the listed ports.
ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7
key Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.