Yamaha EX5R - Manual (Page 79)

79
Voice Mode
■ Mono/Poly
Selects whether the voice is played monophonically
(only one note at a time) or polyphonically (multiple
notes sounding simultaneously).
❏ Settings: mono, poly
■ Key Assign
Selects sngl (single) or mlti (multi) Key Assign. In
sngl (single), if the tone generator receives the same
note twice, the first note is terminated when the
next same note is received again. In mlti (multi),
when the same notes are received, sounds are
assigned to one channel after another, making
multiple part tone generation possible.
❏ Settings: sngl, mlti
■ Volume
Sets the volume of the voice.
❏ Settings: 0~127
■ Vel Depth (Velocity Depth)
Determines the depth of velocity sensitivity.
❏ Settings: –64~0~+63
■ Vel Offset (Velocity Offset)
Sets the velocity offset value.
❏ Settings: –64~0~+63
Changing the value will add to or subtract from the
current velocity value.
[F7]: ARP (Arpeggio)
Following are the parameters related to the
Arpeggiator.
■ Arp Sw (Arpeggio Switch)
Turns the Arpeggiator on and off.
❏ Settings: on, off
The ARPEGGIO key on the front panel serves the same
function.
■ Arp Type (Arpeggio Type)
Selects the type of arpeggio.
❏ Settings: See the Arpeggio Type on page 242.
■ Arp Tempo (Arpeggio Tempo)
Sets the tempo for the arpeggio.
❏ Settings: 30~250
■ Tempo Ctrl (Tempo Control)
Sets whether one of the Knobs controls the arpeggio
tempo, or not.
❏ Settings: off, knob 1~6
■ Arp Note LimitL (Note Limit Low)
Determines the lowest note of the arpeggio range on
the keyboard.
❏ Settings: C–2~G8
The lowest note set here and the note set for Arp Note
High (Note Limit High; see below) determine the range
of notes within which the arpeggio will play.
■ Arp Note LimitH (Note Limit High)
Determines the highest note of the arpeggio range on
the keyboard.
❏ Settings: C–2~G8
[F3]: ARP-EDIT (Arpeggio Edit)
Once the “USR” (USER) arpeggio type is selected,
the ARP EDIT menu is accessible using [F3] at the
bottom of the screen. Press [F3] to access the ARP
EDIT screen, which lets you create your own
custom arpeggio type (User arpeggio). For more
information, see page 238.
[F8]: NAME
Lets you name the edited voice, using up to twelve
characters.
Category name Voice name
Voice/E.qx 5/21/98 11:29 AM Page 79