Sample job mode, Steps for executing a job, F8]: name – Yamaha EX5R User Manual

Page 182

Sample Mode

182

[F8]: NAME

Lets you give a name to the sample with up to eight
characters.

The method for naming an sample and its category is the
same as that for a Voice. For more information, see page
79.

When edited as a stereo data, only the first five letters will
be effective (e. g. ***** L 01).

Sample Job Mode

These jobs let you copy, delete, or append samples that
are created in Sample Edit mode.

Press [JOB] key on the panel while in Sample mode to
enter Sample Job mode. When you enter the Sample
Job mode, the following menu will be displayed. There
are five types of jobs in the Sample Job mode. Press
[F1] (COPY), [F2] (DEL), [F3] (APND), [F4] (NORM),
or [F5] (EXTR) to select a job.

[F1]: COPY (Copy sample)
[F2]: DEL (Delete sample)
[F3]: APND (Append sample)
[F4]: NORM (Normalize)
[F5]: EXTR (Extract)

Steps for Executing a Job

1 When in the Sample Play mode or the Sample Edit

mode, press [JOB] to enter the Sample Job mode.

2 Press [F1] (COPY), [F2] (DEL), [F3] (APND), [F4]

(NORM), or [F5] (EXTR) to select a job to execute.
The selected job screen will be displayed.

You can also select each job by moving the cursor to the
desired job name on the screen and pressing [ENTER].

3 Move the cursor to a parameter and use the

[INC]/[DEC], Data Dial, numeric keypad, or the
Knobs 1~6 to set values.

Sample/E/qx 5/21/98 11:39 AM Page 182