Yamaha EX5R - Manual (Page 229)

Patter
n Mode
229
1. Copy Pattern
This job copies all data from a source pattern to a
designated destination pattern. The pattern’s Play
Effects data and other settings are also copied
simultaneously.
■ Src Ptn (Source Pattern)
Sets the source pattern number that will be copied.
❏ Settings: 1~50
■ Dst Ptn (Destination Pattern)
Sets the destination pattern number that will be
copied to.
❏ Settings: 1~50
2. Clear Pattern
This job erases all data from a pattern and initializes
the pattern’s Play Effects and other settings.
■ Ptn
Sets the pattern number of the pattern that will be
cleared.
❏ Settings: 1~50
3. Copy Track
This job copies all data from a specified track onto
another. The pattern’s Play Effects data and other
settings are also copied simultaneously. This operation
overwrites any data already existing on the destination
track.
■ Src Ptn (Source Pattern)
Sets the source pattern number.
❏ Settings: 1~50
■ SrcTrk (Source Track)
Sets the source track that will be copied.
❏ Settings: 1~8
■ Dst Ptn (Destination Pattern)
Sets the destination pattern number.
❏ Settings: 1~50
■ Dst Trk (Destination Track)
Sets the destination track that will be copied to.
❏ Settings: 1~8
4. Clear Track
This job erases all data from a specified track of the
currently selected pattern. In this case, the job also
initializes all Play Effects and other settings for that
track.
■ Track
Sets the track that will be cleared.
❏ Settings: 1~8, all
5. Mix Track
This job mixes all data from a specified sequence track
(Mix source track) of the currently selected pattern
with another track’s data (Mix destination track).
When the operation is complete, the destination track
contains both its original data and a copy of the source
track’s data.
Pattern/E/qx 5/21/98 11:43 AM Page 229