Yamaha EX5R - Manual (Page 62)

62
Introductor
y
Section
Sequence Record Modes & Editing
The number and type of recording modes available is different for each EX sequencer function:
● Replace
In the “Replace” real-time record mode the EX5, EX5R, or EX7 records exactly what you play as
you play it, erasing any previous material in the record track as you do so. This is the mode you’ll
usually use when recording a new track “from scratch.” The fact that you’re recording in real-time
means that all the subtle timing and nuances of your performance will be accurately recorded (as
well as the mistakes). If you do need to make changes after making a recording using the Replace
mode, the EX editing functions (page 201) give you full control.
● Overdub
The “Overdub” real-time record mode allows the same type of real-time recording as the Replace
mode, except that previous material in the record track is retained so that you can add new
material to a previously recorded track. This can be particularly useful when recording a drum
track, for example: you can record the bass drum and snare on the first run, then overdub the hi-
hat and tom-toms, and finally overdub the cymbals and fills.
● Punch
The Punch mode, only available in the Song mode, is actually a variation of the real-time Replace
record mode, except that you can specify the measures at which you want to begin and end
recording. You can also specify the measure from which you want to begin playback prior to
recording. This is perfect for re-recording a section of a track — from one or two measures to an
entire chorus, as required — while leaving the rest of the track intact.
RECORD MODES
Replace, Overdub, Step, Multi, Punch
Replace, Overdub, Step, Multi
Replace, Overdub, Step
SEQUENCER FUNCTION
SONG
PATTERN
ARPEGGIO
Basic/E/qx 5/21/98 11:22 AM Page 62