Enable vlan, Disable vlan, Show vlan setting – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual

Page 259: 6 enable vlan, 7 disable vlan, 8 show vlan setting

Dimension ES-3124 Ethernet Switch

IEEE 802.1Q Tagged VLAN Commands

32-7

where

The VLAN ID [1 – 4094].

This command deletes the specified VLAN ID entry from the static VLAN table. The following example deletes
entry 2 in the static VLAN table.

Figure 32-9 no vlan Command Example

32.6 Enable VLAN

Syntax:

vlan

This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.

32.7 Disable VLAN

Syntax:

vlan
inactive

This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.

32.8 Show VLAN Setting

Syntax:

show vlan

This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.

An example is shown next.

For the

AdCtl

section of the last column, “-“ is a port set to normal, “x” is a forbidden port and “F” is a fixed port.

For the

TagCtl

section of the last column, “T“ is a tagged port, “U” is an untagged port.

ras(config)# no vlan 2