Vlan-trunking, Weight, Egress set – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 250: 9 vlan-trunking, 10 weight, 11 egress set
Dimension ES-3124 Ethernet Switch
31-14
Command Examples
Figure 31-27 frame-type Command Example
31.8.9 vlan-trunking
Syntax:
vlan-trunking
Enable VLAN Trunking on ports connected to other switches or routers (but not ports directly connected to end
users) to allow frames belonging to unknown VLAN groups to pass through the switch.
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable VLAN Trunking on the interface.
Figure 31-28 vlan-trunking Command Example
31.8.10 weight
Syntax:
weight
where
...
Sets the interface WFQ weighting. A weight value of one to eight is given to
each variable from wt1 to wt8.
An example is shown next.
Enable port two and ports six to twelve for configuration.
Set the queue weights from Q0 to Q7.
Figure 31-29 weight Command Example
31.8.11 egress set
Syntax:
ras(config)# interface port-channel 1,3-5
ras(config-interface)# vlan-trunking
ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged
ras# configure
ras(config)# interface port-channel 2,6-12
ras(config-interface)# weight 8 7 6 5 4 3 2 1