ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 228)

Dimension ES-3124 Ethernet Switch
30-20 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
trap-destination Sets the IP addresses of up to four
stations to send your SNMP traps
to.
logins username
password Configures up to four read-only
login accounts.
service-control icmp Allows ICMP access to the switch
such as pinging and tracerouting.
snmp Allows SNMP management.
http
number>
Allows HTTP access on the
specified service port and defines
the timeout period.
telnet
number>
Allows Telnet access on the
specified service port.
ftp Allows FTP access on the
specified service port.
ssh Allows SSH access on the
specified service port.
https
number>
Allows HTTPS access on the
specified service port.
remote-
management Enables a specified secured client
set.
start-addr
end-addr
service <[telnet]
[ftp][http][icmp]
[snmp][ssh][https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
admin-password Changes the administrator
password.
vlan-stacking Enables VLAN stacking on the
switch.
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
default-
management band>
Specifies through which traffic flow
the switch is to send packets.
ssh known-hosts ip> <1024|ssh-
rsa|ssh-dsa> Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration Re-generates a certificate.
timeout <0-65535> Sets the HTTPS timeout period.
multi-login Enables multi-login.