ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 229)

Dimension ES-3124 Ethernet Switch
Introducing the Commands 30-21
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
mvr Enters the MVR (Multicast VLAN
Registration) configuration mode.
See Section 30.9.6 for more
information.
dhcp-relay Enables DHCP relay.
helper-address
[svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
option Allows the switch to add DHCP
relay agent information.
information Allows the switch to add system
name to agent information.
30.9.4 config-vlan Commands
The following table lists the config-vlan commands in configuration mode.
Table 30-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
name Specifies a name for identification
purposes.
normal Specifies the port(s) to dynamically join
this VLAN group using GVRP
fixed Specifies the port(s) to be a permanent
member of this VLAN group.
forbidden
list>
Specifies the port(s) you want to prohibit
from joining this VLAN group.
untagged
list>
Specifies the port(s) you don’t want to
tag all outgoing frames transmitted with
this VLAN Group ID.
inactive Disables the specified VLAN.
help Displays a list of available VLAN
commands.
no fixed list> Sets fixed port(s) to normal port(s).
forbidden
list>
Sets forbidden port(s) to normal port(s).
untagged
list>
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.