ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 219)

Dimension ES-3124 Ethernet Switch
Introducing the Commands 30-11
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
logout Exits from the CLI.
history Displays a list of previously
command(s) that you have
executed.
exit Exits from the CLI.
mode zynos Changes the CLI mode to the
ZyNOS format.
password Change the password for Enable
mode.
no ip Sets the management IP address
to the default value.
route
inactive
Enables a specified IP static route.
route Removes a specified IP static
route.
igmp-filtering Clears the IGMP filtering settings
on the switch.
profile Deletes the IGMP filtering profile.
profile
start-address
end-address
Deletes a rule in the IGMP filtering
profile.
igmp-snooping Disables IGMP snooping.
mac-forward mac vlan
interface
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mac vlan
interface
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac-filter mac vlan
inactive
Enables the specified MAC-filter
rule.
mac vlan Disables the specified MAC filter
rule.
mirror-port Disables port mirroring on the
switch.
lacp Disables the link aggregation
control protocol (dynamic trunking)
on the switch.
trunk
lacp
Disables LACP in the specified
trunk group.