ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 234)

Dimension ES-3124 Ethernet Switch
30-26 Introducing the Commands
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
intrusion-lock
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected the
cable.
inactive Disables the specified interface
on the switch
help Displays a description of the
interface commands.
exit Exits from the interface
configuration command set.
vlan-stacking role Sets the VLAN stacking port
roles of the specified interface.
vlan-stacking SPVID <1-4094> Sets the service provider VID of
the specified interface.
vlan-stacking priority <0-7> Sets the priority of the specified
interface in VLAN stacking.
cable_diagnostics Displays whether a cable is
connected to the port (good) or
not (open).
intrusion-lock Enables intrusion lock on a port
and a port cannot be connected
again after you disconnected the
cable.
test Performs an interface loopback
test.
30.9.6 mvr Commands
The following table lists the mvr commands in configuration mode.
Table 30-6 Command Summary: mvr Commands
COMMAND DESCRIPTION
mvr <1-4094> Enters the MVR (Multicast VLAN
Registration) configuration mode.
source-port
list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN.
receiver-port
list>
Sets the receiver port(s).
An MVR receiver port can only receive
multicast traffic in a multicast VLAN.
inactive Disables MVR settings.