Show ip, Show logging, 3 show ip – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 238: 4 show logging

Dimension ES-3124 Ethernet Switch
31-2
Command Examples
Figure 31-2 show hardware-monitor Command Example
31.2.3 show
ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all switch interfaces.
Figure 31-3 show ip Command Example
31.2.4
show logging
This command is not available in User mode.
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
ras> show ip
Out-of-band Management IP Address = 192.168.0.1
Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>
ras> show hardware-monitor c
Temperature Unit : (c)
Temperature(%c) Current Max Min Threshold Status
-----------------------------------------------------------
MAC 40.0 40.0 30.5 85.0 Normal
CPU 35.0 36.0 29.0 85.0 Normal
PHY 33.0 33.0 29.5 85.0 Normal
FAN Speed(RPM) Current Max Min Threshold Status
--------------------------------------------------------
FAN1 5625 5716 5493 2750 Normal
FAN2 5958 6114 5859 2750 Normal
FAN3 6061 6114 5810 2750 Normal
Voltage(V) Current Max Min Threshold Status
--------------------------------------------------------
VCOREA 2.528 2.544 2.528 +-10% Normal
VINRO 1.232 1.232 1.232 +-10% Normal
3.3VIN 3.344 3.344 3.344 +-8% Normal
12VIN 11.977 11.977 11.977 +-11% Normal
1.3VIN 1.312 1.312 1.312 +-10% Normal
1.25VIN 1.232 1.248 1.232 +-8% Normal
1.8VIN 1.824 1.840 1.824 +-10% Normal
BPS_12VIN -- -- -- -- Absent
ras>