Command examples, Overview, Show commands – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 237: Show system-information, Show hardware-monitor, Chapter 31 command examples, 1 overview, 2 show commands, 1 show system-information, 2 show hardware-monitor

Dimension ES-3124 Ethernet Switch
Command Examples
31-1
This chapter describes some commands in more detail.
31.1 Overview
These are commands that you may use frequently in maintaining your switch.
31.2 show Commands
These are the commonly used
show
commands.
31.2.1
show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
Figure 31-1 show system-information Command Example
31.2.2 show
hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Chapter 31
Command Examples
ras> show system-information
System Name : ES-3124
System Contact :
System Location :
Ethernet Address : 00:13:49:00:00:02
ZyNOS F/W Version : V3.60(TP.2)b0 | 08/01/2005
RomRasSize : 3016434
System up Time : 3:26:48 (12eefc ticks)
Bootbase Version : V0.6 | 01/14/2005
ZyNOS CODE : RAS Aug 1 2005 15:33:51
Product Model : ES-3124
ras>