ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 224)

Dimension ES-3124 Ethernet Switch
30-16 Introducing the Commands
Table 30-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
cluster Sets the cluster management
VLAN ID.
name Configures a name to identify the
cluster manager
member
address> password
Sets the cluster member switch’s
hardware MAC address and
password.
rcommand
address>
Logs into a cluster member switch.
classifier
<[packet-format
<802.3untag|802.3ta
g|
EtherIIuntag|EtherI
Itag>] [priority
<0-7>]
[vlan ]
[ethernet-type
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac
mac-addr>]
[source-port num>] [destination-
mac
addr>]
[dscp <0-63> ]
[ip-protocol
num|tcp|udp|icmp|eg
p|ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip addr> [mask-bits
]]
[source-socket
]
[destination-ip
[mask-bits bits>]]
[destination-socket
]
[inactive]>
Configures a classifier. A classifier
groups traffic into data flows
according to specific criteria such
as the source address, destination
address, source port number,
destination port number or
incoming port number.