ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 231

Dimension ES-3124 Ethernet Switch
Introducing the Commands
30-23
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
weight
Sets the interface to use WFQ
weighting. A weight value of one
to eight is given to each variable
from wt 1 to wt 8.
egress
set
Sets the outgoing traffic port list
for a port-based VLAN.
igmp-immediate-
leave
Enables IGMP immediate leave
on the port.
igmp-filtering
profile
Sets the IGMP filtering profile for
this port.
igmp-group-limited
Limits the number of multicast
groups.
igmp-group-limited
number
Sets the number of multicast
groups this port is allowed to join.
igmp-querier-mode
Sets the IGMP querier mode of a
port.
Selects auto to treat the IGMP
queries normally, fixed to
always treat the port as a querier
port no matter there is a query or
edge to treat the port as a non-
querier port which drops any
IGMP queries received.
pvid
<1-4094>
The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
ingress-check
Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
gvrp
Enables this function to permit
VLAN groups beyond the local
switch.
frame-type
Choose to accept both tagged
and untagged incoming frames
or just tagged incoming frames
on a port.
name
Sets a name for your interface.
Enter a descriptive name (up to
nine printable ASCII characters).