ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 233)

Dimension ES-3124 Ethernet Switch
Introducing the Commands 30-25
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
dir Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
speed-duplex
half|100-full|1000-full>
Sets the duplex mode (half, full)
and speed (10/100/1000 Mbps)
of the connection on the
interface. Selecting auto (auto-
negotiation) makes one port able
to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
bpdu-control Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
no egress set Disables the outgoing traffic port
list for a port-based VLAN.
igmp-immediate-leave Disables IGMP immediate leave
on the port.
igmp-filtering profile Disables IGMP filtering on the
port.
igmp-group-limited Disables IGMP group limitation.
ingress-check Incoming traffic is not checked
for VLAN tags.
gvrp Disables GVRP on the switch.
flow-control Disables flow control on the
switch.
vlan-trunking Disables VLAN trunking on the
switch.
mirror Disables port mirroring on the
switch.
bandwidth-limit Disables bandwidth limit on the
switch.
broadcast-limit Disables broadcast storm control
limit on the switch.
multicast-limit Disables multicast limit on the
switch.
dlf-limit Disables destination lookup
failure (DLF) on the switch.
inactive
Enables the specified interface
on the switch.