Configure mode, 3 configure mode – ZyXEL Communications ZyXEL Dimension ES-3124 User Manual
Page 218

Dimension ES-3124 Ethernet Switch
30-10 Introducing the Commands
Table 30-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
mac-flush
Clears the MAC address table.
Removes all learned MAC address on
the specified port(s).
erase running-config
Resets to the factory default settings.
boot config
Restarts the system with the specified
configuration file.
reload config
Restarts the system and use the
specified configuration file.
write memory
Saves the configuration to the
configuration file the switch is currently
using.
Saves the configuration to the specified
configuration file on the switch.
copy running-config
tftp
Backs up running configuration to the
specified TFTP server with the specified
file name.
tftp Config
Restores configuration with the specified
filename from the specified TFTP
server.
flash file> Restores firmware via TFTP. ping [ [-t] Sends a Ping request to an Ethernet traceroute [in-band|out-of- [ttl <1-255>] Determines the path a packet takes to a ssh <1|2> <[user@]dest- ip> Connects to an SSH server with the 30.9.3 Configure Mode The following table lists the commands in Configuration (or Config) mode. Table 30-3 Command Summary: Configure Mode COMMAND DESCRIPTION help Displays help information.
[size <0-1472>]
device.
band|vlan
[wait <1-60>]
[queries <1-10>]
device.
specified SSH version.