beautypg.com

ZyXEL Communications ZyXEL Dimension ES-3124 User Manual

Page 222

background image

Dimension ES-3124 Ethernet Switch

30-14 Introducing the Commands

Table 30-3 Command Summary: Configure Mode

COMMAND DESCRIPTION

multi-login

Disables another administrator
from logging into Telnet or the CLI.

cluster

Disables cluster management on
the switch.

member

address>

Removes the cluster member.

mvr

Disables MVR on the switch.

wfq fe-spq

Sets the switch to use WFQ to
service all queues for the
10/100Mbps Ethernet port.

vlan <1-4094>

Enters the VLAN configuration
mode. See Section 30.9.4 for more
information.

vlan-type <802.1q|port-based>

Specifies the VLAN type.

igmp-snooping

Enables IGMP snooping.

unknown-multicast-

frame

Sets how to treat traffic from
unknown multicast group.

igmp-filtering

Enables IGMP filtering on the
switch.

profile

start-address

end-address

Sets the range of multicast
address(es) in a profile.

interface port-channel

list>

Enables a port or a list of ports for
configuration. See Section 30.9.5

for more details.

spq

Sets the queuing method to SPQ
(Strictly Priority Queuing).

wfq

Sets the queuing method to WFQ
(Weighted Fair Queuing).

fe-spq

Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.

ip

route


Creates a static route.


[metric ]
[name ]

[inactive]

Sets the metric of a static route or
deactivates a static route.