ZyXEL Communications ZyXEL Dimension ES-3124 - Manual (Page 230)

Dimension ES-3124 Ethernet Switch
30-22 Introducing the Commands
Table 30-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
inactive Enables the specified VLAN.
ip address
inband-default
dhcp-bootp
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
ip address
default-gateway
Deletes the default gateway from this
VLAN.
ip address address> Deletes the IP address and subnet
mask from this VLAN.
exit Leaves config-vlan mode.
ip address inband-default
dhcp-bootp
release Releases the dynamic in-band IP
address.
inband-default
dhcp-bootp renew
Updates the dynamic in-band IP
address.
inband-default
dhcp-bootp Sets the dynamic in-band IP address.
inband-default
Sets a static in-band IP address and
subnet mask.
default-gateway Sets a default gateway IP address for
this VLAN.
manageable Allows the switch to be managed using
this specified IP address.
Sets the IP address and subnet mask of
the switch in the specified VLAN for
packet loopback test.
30.9.5 interface Commands
The following commands are listed in configuration mode as “interface” switch commands; all are preceded with
the command
interface port-channel.
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
interface
port-
channel
list>
Enables a port or a list of ports
for configuration.