Zhone Technologies 900 - Manual (Page 35)

Data Cards IMACS System Release 5.1.6 1-23
HSU Card HSU Card User Screens and Settings
1.3.2 HSU Card Test Screen
Selecting “Test” from the HSU Card Main Screen will access the Test Screen shown in Figure
1-15. From this screen, you can create test situations between HSU Cards, or between a single
card and test equipment at a remote site. Table 1-7 lists the actions you can perform from the
bottom line of this screen, and Table 1-8 lists the settings presented on this screen, along with
their possible and default values.
Figure 1-15. Typical HSU Card Test Screen
Table 1-7. Test Screen Actions
Table 1-8. Test Screen Option Settings and Defaults
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
InsertErr Allows you to manually insert a single error into the clear data signal.
Clear Clears the Test Screen and resets all counters to zero.
Main Returns to the HSU Card Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.