Zhone Technologies 900 - Manual (Page 14)

1-2 IMACS System Release 5.1.6 Data Cards
Model No. Running Head HSU Cards HSU Card
Figure 1-1. Two-Port HSU 530/35 Card Switches
1.2.1.2 Installing the Two-Port HSU 530/35 Card
Install the Two-Port HSU 530/35 Card into any user card slots. These slots are U1 to U8 on
the two-sided chassis and front-loading chassis with power supplies on top, or P1 to P4 and
W1 to W4 on the front-loading chassis with power supplies on the side.
1.2.2 HSU-T V11 Card Description (820360)
The HSU-T V11 Card has two ports that connect to RS-530 or X.21 CPE devices. Each port
can operate as either DCE or DTE, with data speeds ranging from 56 or 64 kbps to 1.536 or
1.984 Mbps.
1.2.2.1 HSU-T V11 Card Jumper/Switch Settings
The HSU-T V11 Card main board does not contain any jumpers or switches.
Power
Bus
Edge
Connector
P
1
P
2
HSU*2
530/35
HSU RS530/V.35
Port #1
HSU RS530/V.35
Port #2
RS-530
V.35
RS-530
V.35