Zhone Technologies 900 - Manual (Page 110)

4-2 IMACS System Release 5.1.6 Data Cards
Model No. Running Head DS0-DP Card User Screens and Settings DS0-DP Card
4.3 DS0-DP Card User Screens and Settings
4.3.1 DS0-DP Card Main Screen
You must configure the DS0-DP card for operation. This is done from the DS0-DP Card Main
Screen, which is shown in Figure 4-1. To go to that screen, highlight the desired card in the
System Main Screen and press .
Figure 4-1. Typical DS0-DP Card Main Screen
The bottom highlighted line of this screen shows several actions you can perform from the
screen. To perform an action, simply press the key indicated by the uppercase letter of the
desired action. For example, to save your configuration settings, press “s”. Table 4-1 lists
these actions, and Table 4-2 summarizes the DS0-DP card parameters and available settings.
These are also described in the following paragraphs.