Zhone Technologies 900 - Manual (Page 147)

Data Cards IMACS System Release 5.1.6 5-33
BRI Card BRI Card User Screens and Settings
Notes:
1. The loc and loc_net options are included to support manual loopback override at the
NTU site.
2. These parameters are not supported in this release.
TEST
Choosing net allows you to set loopback configuration to the network loop (between the BRI
card and NTU). The default is off.
TIMER
This indicates whether the loopback configuration is set to time out, or whether it is ongoing.
The options are off and on (default). When this option is on, the loopback timeout is set to 15
minutes. This is a read-only parameter; it is not user-selectable.
STATUS
This parameter indicates the direction of the loopback configuration. The options are off
(default), loc (local loop), net (network loop), and loc_net (local and network loops). The loc
and loc_net parameters are included in the event that the local loopback testing is activated
manually by selecting a switch on the front panel of the NTU. This is a read-only parameter;
it is not user-selectable.
ERROR
This parameter is not supported in this release.
TOTAL
This parameter is not supported in this release.
TEST off net off
TIMER off on on
STATUS off loc net loc_net 1 off
ERROR n/a 2 n/a
TOTAL n/a 2 n/a