Zhone Technologies 900 - Manual (Page 137)

Data Cards IMACS System Release 5.1.6 5-23
BRI Card BRI Card User Screens and Settings
TEI VAL
The Terminal Endpoint ID (TEI VAL) settings are 0-126. This is an information-only field.
STAT
The Data link Status (STAT) of a terminal. The following settings displayed are: 0-Not used,
1-TEI unassigned, 2-Assign awaiting TEI, 3-Establish awaiting TEI, 4-TEI assigned,
5-Awaiting establishment, 6-Awaiting release, 7-Multiple frame established and 8-Timer
recover. This is an information-only field.
#CALLS
The number of calls (#CALLS) that are active.
5.3.9 Conversion Screen
The conversion operation (conVert command) allows you to compress B-channel voice traffic
used with the ADPCM card. Figure 5-11 shows a Conversion Screen, Table 5-14 lists the
actions you can perform from its bottom line, and Table 5-15 shows the option settings and
defaults. To display the Conversion Screen, type “v” (conVert) in the BRI Card Main Screen.
You do not need to assign both B-channels of a B1+B2 circuit to ADPCM engines. Also,
B-channels can share an ADPCM time slot with any other type of service.