USRobotics V.34 - Manual (Page 72)

COURIER HIGH SPEED MODEMS
Fax Operations 5-3
FCC Notice
FCC part 68, rules regarding fax operation, has been amended
as follows:
Telephone facsimile machines—identification of the sender
of the message: It shall be unlawful for any person within
the United States to use a computer or other electronic
device to send any message via a telephone facsimile
machine unless such a message clearly contains, in a margin
at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an
identification of the business, other entity, or individual
sending the message and the telephone number of the
sending machine or of such business, other entity, or
individual. Telephone facsimile machines manufactured on
and after December 20, 1992 must clearly mark such
identifying information on each transmitted page.
NOTES TO PROGRAMMERS
Lists of supported Class 1 fax commands and optional Class 2.0
commands are in Appendix K.
If you want to know more about the supported Class 1 fax
commands, refer to the standard for the Service Class 1 fax
protocol.
ANSI/EIA/TIA-578-1990 (EIA-578)
Asynchronous Facsimile DCE Control Standard
November, 1990 Approved: October 22, 1990
For more information on Class 2.0, refer to the standard for the
Service Class 2.0 fax protocol.
ANSI/EIA/TIA-592-1993 (EIA-592)
Asynchronous Facsimile DCE Control Standard
May, 1993
You can obtain copies of these standards by contacting Global
Engineering Documents, at 1-800-854-7179.