beautypg.com

USRobotics V.34 User Manual

Page 182

background image

COURIER HIGH SPEED MODEMS

Dedicated and Leased Line Operations F-17

3. Set the modem to load NVRAM settings at power-on, DIP

switch 10 OFF. It does not matter if the modem is in Dumb
or Smart mode (DIP switch 8).

4. Decide which modem is to be the calling modem and which

the answering modem. Set the answering modem to Auto
Answer, DIP switch 5 OFF, and the calling modem to Auto
Answer suppressed, DIP switch 5 ON.

5. Power off and power on the modems. This initiates the new

DIP switch settings and loads the power-on defaults,
including &L1. The modems go off hook and establish the
connection.

NOTE: If the modems cannot restore the connection and you
could not set the modem to &S2, the reason could be a key-
press abort. If the problem persists, however, you may need to
call your telephone company to have them check your line.