USRobotics V.34 User Manual
Page 157

COURIER HIGH SPEED MODEMS
Remote Access D-15
%C1 Restore configuration. Use this command to
cancel any configuration changes made during
remote access, and restore the original
configuration. However, commands that have
been written to NVRAM (with &W) will not be
restored to their previous settings. Additionally, if
you have forced immediate configuration changes
(with %C2), those changes cannot be reversed with
%C1.
%C2 Execute configuration. Use this command to force
configuration changes to take effect immediately,
during the current connection. We recommend
against forcing immediate configuration changes
unless absolutely necessary, as this can result in an
unreliable connection or even a loss of connection.
%F
n Configure data format.
%F0 No parity, 8 data bits.
%F1 Mark parity, 7 data bits.
%F2 Odd parity, 7 data bits.
%F3 Even parity, 7 data bits.
Password Commands
%P
n=
Disables password security
(n=0 or 1) when no
character follows the equal sign.
%P
n=s Specify the following password string (s) for viewing
privileges only (
n = 0) or view and configuration
privileges (
n= 1).
%P
n?
Display password
n.