USRobotics V.34 - Manual (Page 121)

COURIER HIGH SPEED MODEMS
Summaries and Tables B-27
Register Default Function
S53 0 Bit-mapped register. Select the Dial
Security features you want enabled by
setting S53 to the total of the values in the
Value column in the table below. For
example, S53=3, enables Dial Security with
prompting. S53=5 enables Dial Security,
and local-access password protection. Or
use ATS
r.b=0 (OFF) or 1 (ON). For
example, ATS53.0=1 .2=1 turns on bits 0
and 2. To turn a bit off, set that bit to
zero, as in ATS53.2=0.
Bit Value Result
0 1 Dial security enabled
1 2 Prompting enabled
2 4 Local-access password
protection enabled
NOTE: In addition, enabling local access
password protection disables the &Z
n=s
command which stores up to ten phone
numbers because stored phone numbers
occupy the same space in NVRAM as the
dialback numbers for Dial Security
accounts.
S54 0 Symbol rate bit-mapped register used
primarily by U.S.Robotics Technical
Support for debugging purposes.
Bit 6 (ATS54.6=1) disables Call Indicate
(CI).
Bit 7 (ATS54.7=1) disablesV.8.