USRobotics V.34 - Manual (Page 139)

COURIER HIGH SPEED MODEMS
Alphabetical Command Summary C-17
The function of the voice/data switch is determined by the set-
ting of Register S32, as described in Appendix G. Set the
voice/data switch function to
execute stored command string by
setting Register S32 to 9 with the following command:
ATS32=9
Note that you can reset the voice/data switch at any time to one
of the other available functions. Additionally, you can
overwrite the stored command string with a new one at any
time.
Once you've stored your command string and set Register S32,
all you need to do is press the voice/data switch whenever you
want the command string executed.
&Z n=s This command stores up to ten numbers, where n is the position
0 − 9 in nonvolatile memory, and s is the phone number string.
The number-string may be up to 36 characters long, including
any Dial command options.
AT &Z2=555-6789
Do not include modem settings in the &Z n string. If the call
requires a special setting, insert it in the command string before
the DS
n command. In the following example, &M0 (no error
control) is inserted before the Dial command:
AT&M0 DS2
NOTE: The &Zn=s command functions differently when Dial
Security is enabled. See Appendix D for more information.
&Z n? Display the phone number stored in NVRAM at position n
( n = 0 − 9).