USRobotics V.34 - Manual (Page 55)

COURIER HIGH SPEED MODEMS
4-18 Data Mode Operations
93/CONNECT 21600/V32 96/CONNECT 21600/ARQ/V32
97/CONNECT 21600/VFC 98/CONNECT 21600/ARQ/VFC
101/CONNECT 24000/VFC 102/CONNECT 24000/ARQ/VFC
105/CONNECT 26400/VFC 106/CONNECT 26400/ARQ/VFC
109/CONNECT 28800/VFC 110/CONNECT 28800/ARQ/VFC
139/CONNECT 14400/VFC 141/CONNECT 14400/ARQ/VFC
143/CONNECT 16800/VFC 145/CONNECT 16800/ARQ/VFC
147/CONNECT 19200/VFC 149/CONNECT 19200/ARQ/VFC
111/CONNECT 21600/V34 112/CONNECT 21600/ARQ/V34
113/CONNECT 24000/V34 114/CONNECT 24000/ARQ/V34
115/CONNECT 26400/V34 116/CONNECT 26400/ARQ/V34
117/CONNECT 28800/V34 118/CONNECT 28800/ARQ/V34
120/CONNECT 2400/V34 122/CONNECT 2400/ARQ/V34
124/CONNECT 4800/V34 126/CONNECT 4800/ARQ/V34
128/CONNECT 7200/V34 130/CONNECT 7200/ARQ/V34
132/CONNECT 9600/V34 134/CONNECT 9600/ARQ/V34
136/CONNECT 12000/V34 138/CONNECT 12000/ARQ/V34
140/CONNECT 14400/V34 142/CONNECT 14400/ARQ/V34
144/CONNECT 16800/V34 146/CONNECT 16800/ARQ/V34
148/CONNECT 19200/V34 150/CONNECT 19200/ARQ/V34
&A3 Additional error control indicator (LAPM, HST, MNP,
SYNC, or NONE) and data compression type (V42BIS or
MNP5). Default. When the call is not under one of those
protocols (and ARQ is not included in the result code),
the modem reports either SYNC, indicating a syn-
chronous connection, or NONE, for no protocol.
If the modems are using data compression, the type of
compression, V42BIS or MNP5, is added to the result
code. In the first of the following examples, the modems
negotiated error control for the call (ARQ), used VFC
modulation, are using the LAPM error control protocol,
and are using V.42
bis compression.
CONNECT 28800/ARQ/VFC/LAPM/V42BIS [or MNP/MNP5]
CONNECT 19200/ARQ/V32/LAPM/V42BIS [or MNP/MNP5]
CONNECT 16800/ARQ/HST/HST/V42BIS [or MNP/MNP5]
CONNECT 14400/ARQ/V32/LAPM/V42BIS [or MNP/MNP5]
CONNECT 9600/ARQ/HST/CELLULAR/HST/V42BIS [or MNP5]
CONNECT 9600/SYNC
CONNECT 2400/NONE
NOTE: Although these codes will return numeric identifiers,
they are the same numeric identifiers used for &A2 result codes.
If the modem is in Numeric mode (V0) and set to &A3, you will
not be able to differentiate between &A2 and &A3 result codes.
&A3 result codes may not be compatible with some software.