Renesas M16C FAMILY - Manual (Page 33)

4 Using the FoUSB
4.1.2 FoUSB starts
1) From the Start menu, choose Programs -- RENESAS-TOOLS – Flash-over-USB
V.*.** -- FoUSB Programmer to start the FoUSB. When the FoUSB starts, the
FoUSB main window shown in Figure 4-4 appears.
vi) Main button 2
ii) Update button
v) Detail button
i) Main button 1
iv) Monitor information
iii) MCU select button
Figure 4-4 FoUSB main window
2) Guide to understanding the display of the main screen
No. Item Content
i Main button 1 Use these main buttons to download a program as well as
read, erase or write to the flash memory.
ii Update button Click this button to upgrade the FoUSB version.
iii MCU select button Use this button to select the Target MCU.
iv Monitor information Shows information on the selected MCU.
v Detail button Shows detailed information on the downloaded program.
vi Main button 2 Use these main buttons to set functions, show help or exit.
30