Changing the reverb type – Roland ATELIER AT-300 User Manual
Page 80
78
Adding Various Effects to a Voice
By changing the reverberations of the notes, you can enjoy the atmosphere of
performance in a wide variety of different locations.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to select “Reverb.”
3.
Press the [Rec] button.
4.
Press the Menu [
] and [
] buttons to select “Reverb
Type.”
fig.11-04
5.
Press the Value [-] and [+] buttons to select a Reverb type.
To return to the basic screen, press the [Utility] button.
Changing the Reverb Type
Type
Descriptions
ROOM 1
Reverberation of a small room
ROOM 2
Reverberation of a small club
ROOM 3
Reverberation of a large room
HALL 1
Reverberation of a large concert hall
HALL 2
Reverberation of a small concert hall
SMALL CHURCH
The reverberation of a small church
LARGE CHURCH
The reverberation of a large church
CATHEDRAL
The reverberation of a cathedral
PLATE
A bright, metallic Reverberation
DELAY
An echo-like sound repeated several times
PAN DELAY
Similarly to the above but where the sound is
panned between the left and right speakers
AT-100-300_e.book 78 ページ 2008年5月7日 水曜日 午後3時33分